The Hardware Behind Our Projects
Every network we build is only as good as the hardware inside it, so this page is a straight answer to a question worth asking before you hire anyone: whose equipment are you actually installing? Below are the 15 vendors whose products show up across our projects, what each one makes, and why we reach for it.
We don’t hold formal vendor certifications, and we are not going to claim otherwise. What we do have is nine years of actually installing, configuring, and supporting this hardware in real Lahore buildings, which is the kind of experience a certificate can’t substitute for.
Structured Cabling & Physical Infrastructure
Molex: Molex makes the physical connectivity components, connectors, patch panels, and cable assembly hardware that sit underneath every data and voice network, the passive infrastructure layer most people never think about until it fails. We use Molex components on our structured cabling projects because that layer is the one part of a network that’s genuinely difficult and expensive to redo once walls are closed up, so it’s not where we cut corners.
Corning: Corning manufactures the optical fiber and fiber optic cabling that data and voice networks run on at the physical layer, and is one of the largest fiber makers in the world. We use Corning fiber on structured cabling projects that call for fiber runs between buildings or floors, where cable quality genuinely affects how the network performs years down the line.
Switching & Network Security
H3C: H3C is a major enterprise networking manufacturer, building both the managed switches that form a network’s backbone and, separately, firewall and security appliances. We use H3C switches on network management projects that need real Layer 2/Layer 3 capability rather than a consumer-grade switch stretched past what it was built for.
D-Link: D-Link builds networking hardware, switches and related infrastructure, sized for smaller offices and simpler deployments where a full enterprise switch stack would be overkill. We use D-Link where the job genuinely calls for it, on smaller network management builds, rather than defaulting to the same enterprise gear regardless of project size.
TP-Link: TP-Link manufactures a wide range of networking hardware, from unmanaged desktop switches up to cloud-managed Omada business switches and routers, covering a broad price range within one product line. We reach for TP-Link on network management projects where a client needs dependable hardware without paying for enterprise features they will not use.
Fortinet: Fortinet builds firewalls and network security appliances, FortiGate being their core product line, used for threat prevention, access control, and VPN connectivity. We use Fortinet on network security projects for institutional and larger office clients who need a real firewall, not a router with a security label on the box.
Sangfor: Sangfor builds cybersecurity and network infrastructure products, including next-generation firewalls (their NGAF line) and SD-WAN gear. We use Sangfor alongside Fortinet on network security projects, since having more than one real security vendor in our toolkit means we’re recommending what actually fits a client’s environment instead of a single default answer.
Wireless & Radio Links
Ruckus: Ruckus Networks (now part of CommScope) builds enterprise Wi-Fi access points designed to handle dense, high-device-count environments, lecture halls, hotel lobbies, hospital wards, better than a consumer router ever could. Ruckus is our primary access point brand on wireless network projects for exactly that reason: it’s built for buildings full of people and devices, not a living room.
Ubiquiti: Ubiquiti’s airMAX line builds outdoor wireless radio equipment for point-to-point and point-to-multipoint links, connecting buildings or sites without running physical cable between them. We use airMAX on wireless network projects where a client has more than one building or site and running fiber between them is not practical or affordable.
Ruijie: Ruijie Networks builds enterprise switches and cloud-managed Wi-Fi access points under one unified management platform, so a site’s wired and wireless hardware can be monitored and configured from a single dashboard. We use Ruijie on wireless network projects that also need matching switch hardware on network management builds, so a client is not left managing two disconnected systems for what’s really one network.
CCTV & Surveillance
Hikvision: Hikvision manufactures IP and analog CCTV cameras and network video recorders, and is one of the largest video surveillance manufacturers in the world. We use Hikvision on CCTV & IP surveillance projects where a client needs a wide range of camera types and resolutions to choose from, from entry-point cameras to wide-area outdoor coverage.
Dahua: Dahua also manufactures IP and analog CCTV cameras and NVRs, and sits alongside Hikvision as one of the two largest surveillance manufacturers globally. We keep both Hikvision and Dahua in our toolkit for CCTV & IP surveillance projects, since price, feature set, and availability shift project to project, and having two real options means we’re not locked into recommending one brand regardless of fit.
Uniview: Uniview builds IP cameras and video surveillance systems, with a particular focus on AIoT features, on-camera analytics like people-counting and intrusion detection, built into the hardware itself. We use Uniview on CCTV & IP surveillance projects where a client wants that kind of built-in intelligence rather than a plain recording setup.
IP PABX & Voice
Panasonic: Panasonic’s PABX and phone hardware is already running in plenty of Lahore offices, installed years before we are ever called in. Our IP PABX work with Panasonic systems is usually about configuring extensions, call routing, and integrations around what’s already there, not replacing working hardware for its own sake.
Grandstream: Grandstream builds UCM series IP PBX systems, the hardware and software behind a business’s internal call routing and extensions, and separately makes GWN wireless access points that show up on some of our wireless network projects. On IP PABX work, we set up Grandstream’s UCM systems directly or configure around a client’s existing Grandstream setup, depending on what’s already in place.
D-Link: D-Link’s networking hardware, covered above under Switching & Network Security, is also one of the brands we most often find already installed when we take on an IP PABX project, so configuring around it rather than replacing it is usually the starting point.
Frequently Asked Questions
Are these official, certified partnerships, or just brands you have installed a few times?
They are vendors we work with regularly across real projects, not a one-time install we are listing for show. We don’t hold formal vendor certifications, and we are not going to claim we do; what we can show is nine years of actually installing and supporting this hardware.
Do you sell this equipment directly, or only install it as part of a project?
Right now, this hardware comes as part of a project we design and install for you. We’re planning a shop section where some of these products will be available on their own, but that isn’t live yet.
We already have equipment from a brand you have not listed here. Can you still work with it?
In most cases, yes. This list is what we reach for on new projects, not the limit of what we can support, manage, or integrate with. Tell us what you are running and we will be straight with you about whether we can work with it.
Why do you use more than one brand for the same type of equipment, like CCTV or firewalls?
Because no single vendor is the right fit for every project. Price, feature set, and what a site actually needs shift from job to job, and carrying more than one real option in a category means we are matching hardware to your project instead of your project to whatever brand we happen to sell.
Does using bigger international brands mean a project costs more than using a local or generic brand?
Not necessarily. It depends on the scale and requirements of the project itself. What these brands buy you is hardware built to handle real business use, not a home-grade product pushed into a role it was not designed for, which usually costs more in the long run through failures and redos.
Ask Us About a Specific Brand or Project
Curious whether a specific vendor fits what you are planning, or want to know what’s behind an existing system you have inherited? Call 042-35781151 or use the button below and we will give you a straight answer.